Product List
Membership registration or login is required to view SDS / technical materials.
-
PICK UP
ThreeBond 1541C
- The tack-free time of the product is short, and it shows high initial adhesion
- Since its main solvent is water, there is no possibility of air pollution or ignition
- Application of the adhesive to one side can give excellent adhesive strength
- It has high workability. A small quantity of the adhesive can be spread on a large area. It is cost-efficient
- It is applicable to Styrofoam to which conventional organic solvent type adhesives cannot be used
-
PICK UP
ThreeBond 1549B
- The aqueous emulsion type adhesive is not subjected to the control of the Fire Defense Law
- It is suitable for screen printing
- The dried film is clear and colorless
-
PICK UP
ThreeBond 1771M
- It can be quickly cured by irradiation with light.
- Low viscosity and excellent gap penetration.
- Blushing can be prevented by irradiation with light.
- Since it cures with light through anionic polymerization, it is not affected by oxygen inhibition and has good surface curability.
- In areas not exposed to light, it can cure with moisture. Therefore, there is no possibility of curing failure.
-
PICK UP
ThreeBond 1773E
- The light-curing property developed by the proprietary technology of Three Bond is added to the properties of existing instant adhesives.
- Overflow of the adhesive can be cured by irradiation with light.
- Since the adhesive penetrating between the substrates quickly cures, jigs for temporarily securing parts are not required.
- Blushing can be prevented by irradiation with light.
- Under irradiation with light, the adhesive can be used as a filler adhesive, which is difficult to do with existing instant adhesives.
-
PICK UP
ThreeBond 1807
- Excellent penetrability into gaps between pins and bushes to prevent elongation and wear of chain.
- Adequate viscosity and good retention on chain.
- Special lubricant composition designed for chains for high- to low-speed operations.
- Low stickiness, and less adhesion of dust.
- Even under low temperatures, the flexibility and following performance of the coating film are maintained.
-
PICK UP
ThreeBond 1815D
- The grease excels in extreme-pressure property and is very resistant to high load. Its weld load of 4900N obtained in high-speed four-ball extreme-pressure test cannot be realized by existing extreme-pressure greases. The excellent load carrying capacity
- It excels in rust preventing performance. At present, it is only TB1815D that does not cause rust after a lapse of 500 hours of salt spray test.
- It has excellent water resistance. Although most greases flow out in the wet roll stability test, TB1815D shows little change in consistency. In the wet lubricity test, it is expected to have good lubricity after water is mixed in it.
-
PICK UP
ThreeBond 1816
- Excellent penetration on pins and bushes and prevents chain stretching and wear.
- Excellent moderate viscosity residual on chain.
- Can be used on high and low speed chains because it is formulated with a special lubricant.
- Lower stickiness therefore low adhesion of dust.
- Even at low temperatures, the film is flexible and the chain's tracking capacity is maintained.
-
PICK UP
ThreeBond 1821B
- Registered by NSF standard as 3H, H1.
- Applicable to food equipment.
- Aerosol type with 2-way nozzle.
-
PICK UP
ThreeBond 1855
- It does not affect rubber or plastics.
- Usable in a wide temperature range from -30 to 170°C.
- Excelling in thermal oxidative stability, fire resistance, water resistance and break oil resistance.
-
PICK UP
ThreeBond 1901
- Molybdenum disulfide-based anti-seizure lubricant which can form a tough lubricating film excelling in heat resistance and pressure resistance.
- Applicable in a wide temperature range (-60 to 400ºC) Applicable at up to 800ºC when used for prevention of seizure of sealed parts of screws, pins, etc.
- Facilitating assembly and disassembly (particularly of joints and threaded portions) and reducing working hours.
- Preventing heat generation, wear, seizure and scoring of sliding parts.
- Reducing machine vibration and frictional noise.