Product List
Membership registration or login is required to view SDS / technical materials.
-
PICK UP
ThreeBond 2478
MEC process to pre-coated bolts (water-based acrylic high-strength type)
- Highest level of breakloose torque.
- Excellent heat resistance. (locking: 130℃, sealing: 170℃)
- Applicable to minimum screw diameter of M3.
- Standard drying conditions: 25℃ for 24 hours.
-
PICK UP
ThreeBond 2488
MEC treatment for pre-coated nuts (water-based acrylic type for nuts)
- Applicable to minimum screw diameter of M3.
- Standard drying conditions: 25°C for 24 hours.
-
PICK UP
ThreeBond 2488E
MEC treatment for pre-coated bolts (water-based epoxy type for bolts and nuts)
- Highest level of fixing strength. (Evaluation of nut treatment: Protrusion rate 50%)
- Applicable to minimum screw diameter of M2.
- Applicable to minimum nut diameter of M4.
- Standard drying conditions: 25°C for 48 hours.
-
- It is quick-drying and improves work efficiency.
- It does not contain CFC or chlorinated solvents.
- Japan's Ordinance on Prevention of Organic Solvent Poisoning is not applicable.
-
- It is quick-drying and improves work efficiency.
- It does not contain CFC or chlorinated solvents.
- Japan's Ordinance on Prevention of Organic Solvent Poisoning is not applicable.
-
- It is quick-drying and improves work efficiency.
- It does not contain CFC or chlorinated solvents.
- Japan's Ordinance on the Prevention of Organic Solvents Poisoning is not applicable.
-
- It can quickly and easily remove oil, grease and mud stuck to floor surfaces.
- Since it can be used undiluted or diluted up to five-fold depending on the degree of dirt, it is very economical.
- Excellent cleaning ability can be obtained regardless of water quality, hard water or soft water.
- It does not contain environmental endocrine disrupters and is not subject to PRTR Law.
- It is an environmentally-friendly material which meets the environmental standard specified by Water Pollution Control Law (COD: 160 mgO/l).
-
- High heat dissipation
- Not containing low-molecular cyclic siloxane
-
- Cures by UV irradiation in several tens of seconds.
- Curing and coloring are promoted after UV irradiation.
- Excels in curability under UV-LED lamp and can cure even under high pressure mercury lamp.
-
- Environment-friendly adhesive that has received the "Biomass Mark (biomass degree: 45%)" certification from the Japan Organics Recycling Association.
- Cures in seconds to several tens of seconds under irradiation with UV light.
- Low viscosity and easy to use.
- Excellent adhesion to glass, plastics, metals, etc.
- Curable with UV-LED (365 nm).