Product List
Membership registration or login is required to view SDS / technical materials.
-
ThreeBond 3170B
- It cures under irradiation of visible or ultraviolet light in a few seconds to several tens of seconds.
- It cures on materials that do not transmit ultraviolet light but transmit visible light.
- It excels in curability in thick films.
- It has high adhesion to plastics, glass and metals.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3170D
- Cures under irradiation with light for seconds to tens of seconds.
- Can be used to surface-bond plastics containing UV absorbing agents.
- Has thixotropic properties.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3170E
- Cures under irradiation with light for seconds to tens of seconds.
- Can be used to surface-bond plastics containing UV absorbing agents.
- Not likely to sag during application.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3170F
- The resin cures under irradiation of visible light or ultraviolet light for a few seconds to several tens of seconds.
- Even on materials that do not transmit ultraviolet light, it cures if the materials transmit visible light.
- It has excellent thick film curability.
- It has high adhesion to various plastics, glass and metals.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3177
- The resin cures under irradiation with UV light or visible light for several to several tens of seconds.
- The single-component adhesive need not be mixed prior to use.
- It is curable with light and moisture. It can be cured quickly with moisture on light blocking materials (metallic and colored materials) and with UV or visibl
- Compared to general UV-curing adhesives, the adhesive can be cured at a lower UV dose (10 kJ/m2 ).
- Excellent moisture resistance and heat resistance.
-
ThreeBond 3178
- The resin can cure under irradiation with UV light (wavelength of 200 to 405 nm) only for several to several tens of seconds. After curing, maintains rubber elasticity over a wide temperature range (-40 to 120°C).
- After application, has excellent shape retention before curing.
- Olefin resin has excellent heat resistance, water resistance, acid resistance, coolant resistance, and low moisture permeability.
- Low compression set ensures excellent seal.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3301W
- Solvent-free, and applicable not only to spot bonding, but also to surface bonding.
- Single-component, and can be used without operations, such as mixing.
- Less outgassing
-
- One-part silicone-based conductive adhesive. It can be cured by heating at 180°C for 60 minutes.
- Since the adhesive is based on silicone resin, it shows relatively stable characteristics at low to high temperatures after curing.
- Less skinning after application. It is suitable for application in a small quantity.
- It can be used as a substitute for the existing silicone-based conductive adhesive TB3303F.
-
- One-part silicone-based conductive adhesive. It can cure at 180C in 60 min.
- After curing, it shows relatively stable characteristics in a wide temperature range because its base material is a silicone resin.
- Since it causes less skinning after applied, it is suitable for application in a minute quantity.
-
- Curable at 210°C in 60 min.
- Good adhesion to gold-plated substrates.