Product List

Membership registration or login is required to view SDS / technical materials.

  • Applicator for Anaerobic Sealants

    Automatic rotary applicator : RTM2

    • The rotor will apply a material to the inner surface of a cylinder.
    • New slim application head makes it possible to dispense materials in holes with a narrow pitch.
    • Rotor rotation detection and output are included.
    • Contains a default braking function to prevent liquid splatter in the event of fast rotor rotation.

  • Applicator for Anaerobic Sealants

    Transfer-type simple applicator: CoaterR

    • Application to only threaded portions can be done with one hand.
    • Waste is minimized because material agent is not applied to the end faces of screw.
    • Application width can be adjusted by changing the rotor width.
    • The small applicator can be installed in a small space in an assembling line.

  • Automatic Applicatorfor Low- to Medium-viscosity Materials

    Tank for 1 kg or less bottle or can (TG1-T), Dispense valve (HPNV-50), Pressure controller (Coater S4), Desktop 3-axis robot (RT7 series)

    • Application by a robot improves productivity and application quality, resulting in reduced cost.
    • Suitable for application of materials in containers of various sizes.
    • Variety of nozzles can be used in combination.

  • Automatic ApplicatorforLow- to Medium-viscosity Materials

    333 ml cartridge type tank (LVCT-AC), Dispense valve (HPNV-50), Pressure controller (Coater S4), Desktop 3-axis robot (RT7 series)

    • Application by a robot improves productivity and application quality, resulting in reduced cost.
    • Variety of nozzles can be used in combination.

  • Body coating

    Ultra Glass Coating NE’X

    • Ultra Glass Coating NE’X provides a long-lasting antifouling effect.
    • It forms a flexible and strong coating film with a glistening gloss characteristic like glass. Conceptual illustration of coating film

  • Cartridge Pump for High-viscosity Materials

    ACB-20 cartridge pump, Pen type manually operated valve (pencil gun)

    • Durability increased with new shaft seal design.
    • Suitable for application of low-viscosity materials also (10 to 300Pa·s)
    • Combined with the pencil gun, the despenser enables manual application.
    • The pump will stop running when the residual material in the cartridge is reduced.

  • Discharge Valve for Surface Applications

    RV-SN Series

    • Special valve to apply a material in plane-like or band-like form (Flat surface dispense).
    • Enables application of a material to a circumference, flat plane, or strip.
    • Enables thin film coating (from 100 µm: data obtained from our experiments).

  • Dispenser for Instant Adhesives

    Tank with low level sensor detection (TG1-TE-1, TG1-TE-2), Minute-quantity and fixed-quantity valve TDV, Dedicated controller

    • Stable fixed-quantity discharge is enabled by the volumetric change of the diaphragm.
    • The mechanism prevents curing of the driving portion, achieving high durability.
    • Use of the exclusive controller and the tank with low level sensor detection allows automation of the application process.

  • Dispenser for Material in the Pails

    AP-30 double-acting pump for pails, H-FLG high-pressure flow gun

    • Combined with the high-pressure flow gun, the dispenser enables manual operation.
    • Suitable for applications of various materials with a wide range of viscosities.
    • The product only requires an air power source.

  • Dispenser for Tube-packaged Materials

    Air dispenser tank (minicoater C5)

    • This dispenser is suitable for the application of various materials with a wide range of viscosity and reduces the workload of manual application.
    • Use of the tube dispenser tank enables application of a material in a tube.
    • Minicoater C5 has two operation modes. Timer-controlled discharge and continuous discharge as well as a vacuum function.