Product List
Membership registration or login is required to view SDS / technical materials.
-
- The hand gun discharges two components in a twin cartridge.
- Eliminates the time to mix two components, reducing workload of manual application.
-
- Durability increased with the new shaft seal design.
- Also suitable for application of low-viscosity materials (10 to 300Pa·s).
- The two-tank system allows you to exchange cartridges without interrupting production.
-
- This is a Long-term Rust Preventive Agent for Salt Damage for car bodies that provides protection from salt damage and protect the undercarriage of a car from rust.
- It forms a flexible coating film with a self-repairing ability.
- Sufficient film thickness can be obtained in the corners where coating films have a tendency to be thin.
- Protects your car from rust while maintaining its beauty.
-
- We provide a wide range of products necessary for daily vehicle maintenance including parts cleaners, lubricants, and paper wipers.
-
Manual Dispenser for Low-viscosity Materials
Tank for 1 kg or less bottle or can (TG1-T), Pen type manually operated valve (pencil gun)
- This dispenser is suitable for application of low-viscosity materials and reduces the workload of manual applications.
- 1 kg or less bottle or can can be loaded into the tank sparing users the time and trouble of transferring the material into another container.
- Air pressure can be changed to adjust dispensing speed.
- Needs no electrical power source.
-
- Best suited to high-pressure pumping of high-viscosity materials (pump ratio: 30:1 or 45:1).
- A design taking the remaining amount into consideration was incorporated. This reduced the remaining amount by 30 to 50% compared with that of the previous products.
-
- Solvent type
- Forms thin film coating excelling in peeling strength
- Low viscosity suitable for sealing relatively small bonding surfaces of precision devices
-
- Solvent type semi-drying gasket.
- Excellent heat resistance and water resistance.
-
- Quick sealing.
- Since this product is a low strength type, it is relatively easy to remove even after complete curing.
- Since the non-solvent liquid gasket does not require open time, parts can be tightened immediately after it is applied.
- Clean finish without dripping after application.
-
- Excellent solvent and chemical resistance
- Excellent heat resistance
- Excellent low-temperature characteristics
- Cures to an elastic rubber at 23°C for 24 hrs