Product List
Membership registration or login is required to view SDS / technical materials.
-
ThreeBond 3013B
- Cures in seconds to several tens of seconds under irradiation with UV light
- Colored to visually indicate the state of application
- Excellent adhesion to various substrates
- After curing, it becomes a flexible cured material.
-
ThreeBond 3013Q
- Cures in seconds by exposure to UV light (200 to 400 nm wavelength)
- After curing, retains rubber elasticity over a wide temperature range
- Excellent heat resistance
- Excellent oil resistance
-
ThreeBond 3013Z
- The resin can cure under irradiation of UV light for several to several tens of seconds.
- Portions of the resin not exposed to UV light can be cured by heating.
- After curing, the resin becomes an elastic body excelling in heat resistance and chemical resistance.
- It emits fluorescence when irradiated with black light (365 nm), and it is possible to check whether or not it has been applied.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3015F
- High Tg (glass transition temperature)
- High tensile shear strength
- Low linear expansion coefficient and low cure shrinkage
-
ThreeBond 3017
- Excellent peel strength to films including polyester films
- Excellent peel strength between various plastics and to plastics and metals
- After curing, the resin has flexibility at room temperature.
- Low moisture permeability
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3017B
- The resin cures under irradiation of ultraviolet light (wavelength of 200 to 400 nm) in several seconds to several tens of seconds.
- The hardness of the cured resin shows flexibility at normal temperatures.
- It has high peel strength between plastic materials and between plastic and metallic materials
- It has low moisture permeability and water absorption.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3017D
- The resin cures under irradiation with UV light for several to several tens of seconds.
- Excellent surface curability.
- The resin cures under irradiation with LED lamp.
- It has high adhesive property to the hard to bond materials of polyolefin.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3017E
- The resin cures under irradiation with UV light from several to several tens of seconds.
- Excellent surface curability and the resin cures under irradiation with LED lamp.
- It has high adhesive property to the hard to bond materials of polyolefin.
- When applying, the dispensing flow is held under controlled.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3017F
- The resin can cure under irradiation with UV light for several to several tens of seconds.
- Excellent surface curability
- It can be cured with an LED lamp.
- High adhesion to hard-to-bond olefin-based materials
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3026B
- Resin developed only for end-sealing of LC panels
- Single-component non-solvent type
- Curing in seconds under irradiation with UV light (Standard curing conditions: 10 kJ/m2 (1000 mJ/cm2 ))
- Since it has low moisture permeability, it prevents permeation of moisture into panels.
- Reduced concentration of inorganic ions that could affect LC materials