Product List
Membership registration or login is required to view SDS / technical materials.
-
ThreeBond 3026B
- Resin developed only for end-sealing of LC panels
- Single-component non-solvent type
- Curing in seconds under irradiation with UV light (Standard curing conditions: 10 kJ/m2 (1000 mJ/cm2 ))
- Since it has low moisture permeability, it prevents permeation of moisture into panels.
- Reduced concentration of inorganic ions that could affect LC materials
-
ThreeBond 3026E
- Resin developed only for end-sealing of LC panels
- One-part non-solvent type
- Curing in seconds under UV light (standard curing condition: 20 kJ/m2 )
-
ThreeBond 3026G
- Resin developed only for end sealing of LC panels
- One-part non-solvent resin not harmful to the environment
- Curing in seconds under irradiation of ultraviolet light
- Liquid crystal is not contaminated by the resin because it contains almost no impurity ions.
-
ThreeBond 3027G
- Cures in seconds to several tens of seconds under irradiation with UV light
- Low water absorption rate and good moisture resistance
- Forms flexible and stretchy cured film having good adhesion.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3027H
- Cures in seconds to several tens of seconds under irradiation with UV light.
- Low water absorption rate and good moisture resistance.
- Forms flexible cured film having good adhesion.
- Colored in red for visibility after application.
- Biomass raw materials are used as part of the raw materials.
-
ThreeBond 3030
- Cures by UV irradiation in seconds (200 to 400 nm wavelength)
- Becomes a soft material after curing
- Adheres to glass, metal, plastics and various other substrates
- Good moisture and heat resistance
- Good heat cycle resistance
-
ThreeBond 3033G
- Has thixotropic characteristics
- Cures under irradiation with UV light for seconds to tens of seconds.
- Forms into a flexible and tough film
- It exhibits adhesion to various materials, including glass, metals and plastics.
- Also exhibits a sufficient curing ability under UV-LED light source.
-
ThreeBond 3033L
- Curing in seconds under irradiation with UV light
- Forms into a flexible and tough material
- Suitable for bonding plastics, glass and metal and various other substrates
-
ThreeBond 3035B
- Developed a grade of sealant for dye-sensitized solar cells
- A single component, solvent-free UV-curing acrylic resin
- Low moisture permeability, excellent resistance to liquid electrolyte
-
ThreeBond 3036G
- The resin can cure under irradiation with UV light for several to several tens of seconds.
- Excellent adhesion to various plastics.
- Reduced shrinkage on curing.
- Sufficient curability under LED light sources.