Product List
Membership registration or login is required to view SDS / technical materials.
-
ThreeBond 2022U
- Base resin of black two-component epoxy-compound resin.
- Combined with TB2103, it ensures high bonding strength even at room temperature.
-
ThreeBond 2023J / ThreeBond 2105C
- Two-component epoxy-compound resin consisting of low-viscosity base resin and hardener.
- Bonding of electronic parts.
-
ThreeBond 2023J / ThreeBond 2105F
- Two-component epoxy-compound resin consisting of low-viscosity base resin and hardener.
-
ThreeBond 2077D
- Low viscosity so easy to use
- Cured material excelling in elasticity
-
- High bonding strength
- Long pot life, and excellent workability (no open time required)
- The initial strength increases so quickly, and the practical strength can be obtained after 12 hours at room temperature (25 C).
- The main agent and the curing agent can be easily mixed only by measuring the equal amounts of the agents with the eye.
- Since it does not contain solvents, it does not damage substrates.
-
- Strong adhesive strength (24.5 MPa (250 kgf/cm2 ) or more)
- Long pot life and high workability
- The strength increases quickly and reaches approx. 90% of the maximum strength after 24 hours at room temperature (25 C).
- The main agent and curing agent can be mixed easily by measuring the equal quantities of the agents by eye.
-
ThreeBond 2083L
- Displays high bonding strength in the air, on wet surfaces and in water.
- Excellent low-temperature curability
- Putty resin excelling in workability on vertical surfaces
- Not containing phthalic ester
-
- High adhesion
- Excellent low-temperature curability
- Since the adhesive has low viscosity and is clear and colorless, the bonded parts are not so visible.
- The main agent and curing agent can be mixed easily by measuring the equal quantities of the agents by eye.
-
ThreeBond 2086N
- It excels in low-temperature curability and can cure at -5 C.
- t exerts adhesive force even on moist surfaces.
- High bonding strength
- After curing, it becomes a flexible body excelling in impact strength.
- The adhesive can be prepared by mixing equal parts of the main and curing agents measured by eye. Therefore, the mixing operation is easy
-
ThreeBond 2086T
- Excellent low-temperature curability.
- Low-viscosity and transparent adhesive allowing bonding areas to be unnoticeable
- With appropriate thixotropic property
